> ## Content Index
> Fetch the complete content index at: https://www.adriadefense.com/llms.txt
> Use this file to discover other available public pages before exploring further.

# Europe Wants China-Free Military Drones. Building the Supply Chain Is the Hard Part.
- URL: https://www.adriadefense.com/europe-wants-china-free-military-drones-building-the-supply-chain-is-the-hard-part/
- Published: 2026-11-19T13:19:17.000Z
- Updated: 2026-11-19T13:28:50.000Z
- Description: Europe wants military drones free from vulnerable foreign supply chains, but its manufacturers face a more complicated reality. From critical components and China-free sourcing claims to EU procurement rules.
- Author: Daniel Opoku
- Tags: Analysis, SEE, Industry, CEE, Drones, Orqa, China

*European drone manufacturers face growing pressure to prove where their components originate. But eliminating dependence on Chinese supply chains requires more than transparent sourcing and stricter procurement rules. It requires industrial investment, reliable alternatives, and governments willing to help build them.*

A European defense ministry can order a domestically manufactured drone. What it cannot do, simply by writing new conditions into a procurement contract, is create a European factory capable of producing every critical component inside it.

That distinction is becoming increasingly important as Europe accelerates military drone production and introduces new requirements intended to strengthen its defense industrial base. Governments want equipment manufactured locally, greater control over critical technologies, and reduced exposure to supply chains that could be disrupted by geopolitical tensions.

The ambition is understandable. China's dominant position in several upstream industries, including rare-earth processing, battery manufacturing, and parts of the electronics supply chain, presents a strategic vulnerability for European defense manufacturers. The war in Ukraine has reinforced the importance of maintaining reliable access to affordable components at scale.

Yet replacing established suppliers is considerably more difficult than shifting final assembly to a European production facility. A company may design its own flight controller, manufacture airframes locally, and assemble complete drones in Europe while still relying on foreign industrial capabilities several layers deeper in its supply chain.

This raises a question that deserves more attention in Europe's emerging drone industrial policy: if governments increasingly expect manufacturers to deliver products free of particular foreign dependencies, who will finance the factories and suppliers needed to make that possible?

## The difference between European-made and China-free

The origin of a finished drone tells only part of its industrial story.

A flight controller manufactured in Europe may incorporate microcontrollers designed by a European semiconductor company but fabricated, packaged, or tested in different countries. A motor assembled by a European supplier can contain permanent magnets whose raw materials were processed in China. Battery packs may be assembled locally using imported cells, while electronic modules can pass through several countries before reaching a drone manufacturer.

These arrangements are normal features of modern industrial production. They do not automatically indicate poor manufacturing practices, security vulnerabilities, or noncompliance with procurement requirements. They do, however, complicate efforts to establish precisely how independent a product is from a particular country's industrial base.

The distinction becomes especially relevant when manufacturers describe their products as China-free.

That description can be understood in several ways. It might refer to the absence of components manufactured by Chinese companies, components physically produced in China, or particular categories of restricted technology. A more demanding definition might also consider upstream manufacturing processes and the origin of critical raw materials.

These are not necessarily equivalent standards.

A product can be assembled entirely outside China while incorporating materials processed there. Conversely, a component manufactured in China by a Western-owned company may be treated differently under certain procurement regimes than a component designed and manufactured by a Chinese supplier.

Even conventional customs rules do not provide a complete answer. Under the [European Union's non-preferential rules of origin](https://taxation-customs.ec.europa.eu/customs/rules-origin-goods/non-preferential-rules-origin%5Fen?ref=adriadefense.com), a product assembled through international manufacturing processes may acquire its legal origin through its last substantial transformation. That determination does not independently establish the origin of every material or subcomponent.

For defense procurement, the most useful distinction is therefore between legal origin, regulatory compliance, and actual supply-chain resilience.

Each addresses a different question, and all three matter.

## Where Europe's drone supply chains remain vulnerable

Some of the greatest challenges lie in components that attract relatively little attention compared with the finished aircraft.

Permanent magnets are one example. Small electric motors used in many drones depend on precisely manufactured magnetic materials, including rare-earth magnets. European companies can design and assemble motors, but alternative sources of the materials and processing capabilities behind them remain limited in important parts of the supply chain.

Semiconductors present another challenge. A manufacturer sourcing microcontrollers, power-management chips, or radio-frequency components from a European or allied supplier may still need to establish where those chips were fabricated and subsequently packaged and tested. Depending on the applicable procurement rules, those manufacturing stages can affect eligibility.

Battery production involves similar complications. European battery-pack assembly does not necessarily establish independence from foreign battery cells, electrode materials, or processed minerals.

Other difficulties are less technologically sophisticated but commercially important. Specialized screws, connectors, plastics, precision tooling, and injection molds can be difficult or expensive to source locally in the required quantities. A European alternative may exist, but not necessarily at a price, production volume, or delivery schedule compatible with manufacturing large numbers of relatively inexpensive military drones.

This is particularly important for small and medium-sized manufacturers. A company producing advanced electronics or complete unmanned systems may have substantial engineering capabilities without possessing the capital to establish its own upstream manufacturing infrastructure.

These weaknesses are not unique to Europe. They reflect decades of industrial specialization, international trade, and production concentrated around established manufacturing ecosystems.

What has changed is the strategic importance of knowing where those dependencies exist and whether they can be reduced before a supply disruption occurs.

## Croatia's Orqa illustrates the industrial challenge

Croatian drone manufacturer [Orqa](https://orqafpv.com/?ref=adriadefense.com), headquartered in Osijek, offers an instructive example of the effort required to establish alternative supply chains.

The company has developed its own drone technologies and invested in vertically integrated production, positioning itself within a growing European industry seeking greater independence from Chinese manufacturers.

Orqa has also been unusually explicit in its public communications about the importance of reducing dependence on China.

In a [February 2026 interview with defense industry publication The Arsenal](https://www.arsenal.eu/p/eur-european-miltech-rethinking-links-to-us-and-china?ref=adriadefense.com), Orqa co-founder and Chief Technology Officer Vlatko Matijević discussed the practical difficulties of sourcing certain components and manufacturing services outside China.

He described challenges involving injection-molded plastics, precision tooling, specialized screws, and permanent magnets. Matijević also explained that some manufacturing activities were still being transferred away from China at the time.

One example was particularly revealing. Orqa had sourced magnets through a European supplier whose manufacturing facility was located in China. Even moving that production elsewhere would not necessarily eliminate dependence on Chinese-processed raw materials.

The significance of such an example extends beyond Orqa. It demonstrates how a company can choose a European commercial partner without necessarily obtaining an entirely European upstream supply chain.

Subsequent public statements by Orqa and its U.S. partners have emphasized the company's progress toward eliminating Chinese components.

In a [May 6, 2026, announcement](https://bylight.com/press-release/orqa-u-s-launches-to-deliver-blue-uas-compliant-fully-american-made-drone-systems-at-scale/?ref=adriadefense.com) concerning the establishment of Orqa U.S., partner By Light stated that Orqa products were manufactured without Chinese parts. An [October 13 announcement](https://orqaus.com/orqa-u-s-awarded-38-million-for-u-s-department-of-war-drone-dominance-gauntlet-ii-competition/?ref=adriadefense.com) concerning a $38 million U.S. defense manufacturing contract used the more specific description that Orqa products contained no Chinese critical components.

The statements were made at different times and in different business contexts. They do not establish that the company's supply-chain declarations are inaccurate. Manufacturing arrangements can change, and the distinction between all components and critical components may reflect different definitions or product scopes.

They do, however, illustrate why the industry would benefit from clearer terminology and consistent methods of verification.

As part of this analysis, AdriaDefense contacted Orqa to better understand the practical challenges European drone manufacturers encounter when developing independent supply chains.

The inquiry addressed the scope of publicly stated China-free sourcing policies, the progress of previously described manufacturing transfers, the origin and traceability of critical components, and the difficulties of identifying qualified alternative suppliers. AdriaDefense also sought broader industry insight into where European manufacturers face the most significant sourcing obstacles and where public investment could help overcome them.

Orqa had not responded by November 19, 2026.

Its experience nonetheless raises a question relevant to manufacturers throughout Europe: how much supply-chain independence can a drone company realistically achieve on its own, and where must national governments and European institutions become part of the solution?

## Europe's procurement targets do not tell the whole story

The European Union has already begun introducing requirements intended to encourage domestic defense manufacturing.

The [Security Action for Europe (SAFE)](https://eur-lex.europa.eu/eli/reg/2025/1106/oj?ref=adriadefense.com) instrument provides up to €150 billion in loans to support defense investment by member states. Under its relevant procurement provisions, components originating outside the EU, the European Economic Area's EFTA states, and Ukraine generally must not exceed 35% of the estimated cost of the end product's components.

The [European Defence Industry Programme (EDIP)](https://www.consilium.europa.eu/en/policies/defence-industry-programme/?ref=adriadefense.com) also includes origin requirements for eligible activities supported through its €1.5 billion grant framework.

These provisions are important steps toward strengthening European defense manufacturing. However, their precise territorial eligibility and other conditions vary by instrument, and the 65% threshold is not a universal rule covering every European military drone.

Neither should it be confused with a guarantee that a product contains no Chinese components.

A percentage-based origin requirement measures a particular form of industrial participation. It does not necessarily establish whether a strategically essential component can be replaced if its supplier becomes unavailable.

A relatively inexpensive electronic component could represent a small proportion of a drone's total component cost while remaining indispensable to its operation. If qualified alternatives are unavailable, a supply disruption could halt production despite compliance with a European-content threshold.

Economic research suggests that this problem extends across the industry.

In a [January 2026 study](https://www.rabobank.com/knowledge/d011511599-european-drone-investments-mapping-the-value-chain?ref=adriadefense.com), RaboResearch examined how spending on military drones circulates through international supply chains.

Using an input-output model, the researchers estimated that approximately 28% of drone component procurement was sourced within the EU under historical patterns, while only 27% of the associated value added ultimately remained in the Union.

In a hypothetical scenario in which 60% of key drone components were procured within the EU, the share of value added retained in Europe increased to 51%.

China's share of value added increased slightly in the model, despite the greater emphasis on European procurement, because of its upstream role in critical materials and electronics.

The study does not represent an audit of individual military drone manufacturers. Its model relies on broader sectoral production and trade data, and actual defense supply chains may differ.

Nevertheless, its findings highlight an important limitation of procurement policy: shifting purchasing toward European suppliers does not necessarily eliminate the underlying international dependencies.

Europe can increase the proportion of components purchased from local companies without achieving the same degree of independence in the materials, equipment, and manufacturing processes those companies rely on.

## The EU has started financing the answer

The European Commission and Parliament have recognized the need to strengthen the industrial capabilities behind drone production.

In a resolution adopted on January 22, 2026, the [European Parliament](https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:52026IP0020&ref=adriadefense.com) called for a critical drone component manufacturing action plan, including targeted subsidies for electric motors, lithium batteries, sensors, and additive manufacturing.

Parliament also supported the development of a European drone sovereignty index to assess dependence on suppliers outside the EU and encourage more resilient supply chains.

These recommendations are not equivalent to binding legislation or fully implemented programs, but they indicate growing recognition that European autonomy requires investment beyond complete drone platforms.

The Commission has already taken steps in that direction.

Under the [EDIP work program adopted in March 2026](https://defence-industry-space.ec.europa.eu/edip-work-programme-adopted-2026-03-30%5Fen?ref=adriadefense.com), more than €700 million is dedicated to reinforcing European defense production, including critical electronic components and other targeted defense products. Funding rates under the relevant calls range from 35% to 100% of eligible project costs.

The program also includes €100 million in equity support for defense start-ups and smaller companies through the Fund Accelerating Defence Supply Chains Transformation, known as FAST.

These measures matter because the challenge is not simply a lack of European drone developers. The industry also needs manufacturers capable of producing critical components at competitive prices, with consistent quality and sufficient capacity.

The effectiveness of EU support will ultimately depend on how successfully funding is translated into commercially sustainable production.

Financing a development project is one thing. Establishing a specialized factory, qualifying its products, building a customer base, and maintaining competitive production over several years is another.

That requires coordination between European funding institutions, national governments, procurement authorities, and industrial suppliers.

## Manufacturers need more than grants

The most consequential investment decisions may take place well below the level of the company delivering the finished drone.

A European electronics manufacturer considering a new production line needs confidence that demand will justify the investment. A company developing an alternative permanent-magnet supply chain may require substantial capital long before its products can compete on price with established imports.

Manufacturers also face testing, certification, and qualification costs. Replacing a critical component can require changes to product design, new testing procedures, and validation of performance and reliability.

Those costs can be difficult for smaller defense technology companies to absorb, particularly when military procurement volumes remain uncertain.

European industrial policy should therefore address both sides of the equation.

Targeted grants, investment support, and financing guarantees can help establish production capabilities. Long-term procurement commitments can then provide the predictable demand needed to make those capabilities commercially sustainable.

Support should also extend to the qualification of alternative components, supplier verification, and independent testing. Without these measures, manufacturers may find themselves funding expensive supply-chain transitions while competing against established suppliers operating at much greater scale.

This does not mean governments should subsidize every component or attempt to reproduce the entire global electronics industry within Europe.

A more effective strategy would identify components whose availability creates the greatest strategic risk, particularly where alternative sourcing is limited and where disruption could interrupt the production of urgently needed defense equipment.

Funding could then be directed toward those specific weaknesses.

European and national authorities should also distinguish between suppliers located within the EU and reliable industrial partners elsewhere. Cooperation with Ukraine, other European countries, and trusted international partners can improve resilience without requiring every stage of production to be confined to EU territory.

The objective should be secure and diversified access to essential technologies, supported by a stronger European industrial base.

## Supply-chain verification should be practical and consistent

More transparent supply chains are an important part of this transition.

Manufacturers making public claims about the absence of Chinese components should be able to explain the scope of those statements and provide appropriate documentation to qualified customers or auditors.

That does not mean publishing commercially sensitive component inventories or revealing confidential supplier relationships.

A practical verification system could distinguish between final assembly, subsystem manufacturing, semiconductor fabrication and packaging, and the origin of strategically important materials. Assessment should focus on critical dependencies rather than treating every minor component as an equal security risk.

Independent verification could be conducted confidentially, with customers receiving confirmation of the applicable standard and any relevant limitations.

Such an approach would make public sourcing declarations more meaningful while protecting legitimate commercial interests.

The European Commission has already begun exploring related principles in the civilian drone sector.

At the November 2026 EU Drone Summit, the Commission presented initial findings from the [European Trusted Drone Label pilot](https://transport.ec.europa.eu/news-events/news/eu-drone-summit-charts-course-competitive-innovative-and-secure-european-drone-market-2026-11-11%5Fen?ref=adriadefense.com). The initiative considers third-party verification, cybersecurity, operational trust, and supply-chain transparency as elements that can help buyers assess drone products.

It is not a military origin certification scheme. However, it demonstrates that supply-chain verification is increasingly becoming a formal policy concern rather than merely a matter of manufacturer declarations.

A comparable risk-based approach for defense procurement could help manufacturers demonstrate compliance while giving governments better information about the industrial dependencies they are trying to reduce.

Importantly, such verification should identify vulnerabilities and guide investment decisions, not simply produce another administrative obstacle for smaller suppliers.

## Ukraine makes industrial independence an urgent question

The war in Ukraine demonstrates why the transition must be realistic.

Modern drone warfare depends on rapid manufacturing, frequent technological adaptation, and the ability to replace equipment at scale. Components must be available when needed, often in large quantities and at prices that make mass production feasible.

Requiring immediate replacement of established suppliers without sufficient alternative capacity could create shortages and increase costs at precisely the moment when production needs to expand.

European governments must therefore balance two legitimate priorities: meeting current operational requirements and reducing strategic dependencies over time.

The [EU-Ukraine Drone Alliance](https://defence-industry-space.ec.europa.eu/commission-hosts-2nd-board-meeting-eu-ukraine-drone-alliance-2026-11-10%5Fen?ref=adriadefense.com), which held its second board meeting on November 10, offers one mechanism for connecting battlefield experience with European industrial development.

Its priorities include industrial cooperation, production expansion, stronger supply chains, and reduced dependencies.

If such initiatives are matched with sustained investment in component production, Europe's growing demand for drones could help create the manufacturing ecosystem needed to support long-term defense readiness.

Ukraine's operational experience also offers an important lesson for policymakers: manufacturing resilience is not defined only by where a product is made, but by whether critical inputs remain available when production must increase rapidly.

## Sovereignty must be built, not simply required

Europe's ambition to reduce dependence on vulnerable foreign supply chains is becoming an increasingly important part of its defense policy. Stronger domestic manufacturing, more transparent sourcing, and clear procurement standards can all contribute to that objective.

Yet there is a fundamental difference between requiring European manufacturers to demonstrate industrial independence and creating the conditions that allow them to achieve it.

Companies remain responsible for accurately representing their products, documenting relevant sourcing arrangements, and complying with the rules governing defense procurement. Public claims about supply-chain independence should be sufficiently precise to withstand appropriate scrutiny.

Governments have a corresponding responsibility to ensure that European manufacturers can obtain the components, materials, and production services needed to meet increasingly ambitious requirements.

That means financing strategically important suppliers, supporting manufacturing expansion, reducing qualification costs, and providing enough long-term demand to justify investment in domestic production.

It also requires accepting that some dependencies cannot be removed immediately, particularly where industrial capabilities have been concentrated outside Europe for decades.

The appropriate response is neither to abandon European-origin ambitions nor to impose requirements without regard to manufacturing realities. It is to establish credible, measurable pathways toward more resilient production.

The experience of companies pursuing localized drone manufacturing illustrates both the progress already being made and the scale of the work that remains.

Ultimately, Europe's industrial sovereignty will not be determined by how many drone manufacturers can place a European label on their products. It will depend on whether those manufacturers can access, verify, and reliably replace the technologies required to keep production running.

**Europe has begun demanding greater independence from its defense industry. The next test is whether it is prepared to invest in the supply chains that make that independence possible.**